tester2

Fix Xbox 360 Red Ring Of Death
The Xbox Red Ring, happens when the game gets over heated
Break the Xbox to the bare Motherboard
Remove heat sinks
After removing the heat sinks from the motherboard, you want to replace all the screws from the large heat sink and the flat heat sink.
Then take thermal paste and place it on the CPU, this will keep the CPU cool
Place back the large heat sink back on the CPU and tighten the four screws.
Place thermal paste on the CB Chip You want and the flat heat sink back on and tighten.
After placing both heat sinks in place, now we want to heat up the Xbox.
We do this by placing the Xbox back in its case
Put back on the RF module, this is your turn on button.
Most important is not to plug the fan back in because we want the Xbox to overheat.
Plug up the Xbox and turn it on.
Keep it on for over 20 minutes, until you see two red lights on and not three, this will tell you the Xbox is overheated and will turn its self off.
After it turn its self off, placed the fan vacuum back on, turn on the fan and when you press start, the Red Rings of Death will be on.
The lights will turn green.
Learning how Fix Xbox 360 Red Ring Of Death, is making me money, it doesn’t take that long but about an hour. I charge $80.00 to do it.